| Operating System: Embedded Linux |
| Compression (Analog): H.264 |
| Video Format: |
| Analog: NTSC - 352 x 240 (CIF), 720 x 240 (Half-D1), 720 x 480 (D1) |
| IP: Up to 2MP per channel |
| Recording Rates: |
| Analog: Individually Adjustable (0 - 30fps) / CIF: 120fps / Half-D1: 120fps / D1: 60fps |
| IP: FPS is over 4 channels at given MP resolutions. |
| 1.3MP (2MP) |
| H.264: 100fps |
| MJPEG: 25fps, 16fps |
| Networking: 1x - 10/100 Base-T Ethernet, RJ-45 |
| Supported IP cameras: (support IP PTZ, IP IO, & IP audio if IP cameras built-in) AXIS, Panasonic, SONY, Arecont, Mobotix, BOSCH, IQinvision, JVC, TOSHIBA, VIVOTEK, ACTi, D-Link, PiXORD, PELCO, Apron, Lilin and more |
| Browser/Remote Client: MS Internet Explorer 6+, Windows 2000, XP, VISTA |
| Operator Interface: USB mouse, USB PC keyboard, remote controller (supports optional IR extension cable) |
| Connections: |
| Front Panel Connections: |
| Front Panel Controls: IR Extension Port |
| DVD writer: Not Included |
| USB 2.0 (2) |
| Rear Panel Connections: |
| Video Inputs (Analog): 4 - BNC connectors |
| Video Inputs (IP): 4 video H.264/MPEG4/JPEG data streams |
| Video Output: 1 - VGA out, 2 - Spot Monitor Out |
| Audio Input/Output: 4/1 |
| Alarm Inputs/Relay Outputs: 4/1 |
| E-SATA: 1 |
| USB 2.0: (none) |
| Communication: 1x - RS232, 1x - RS485 |
| AC Power: Power Button, Power Adapter (12V DC) |
| Software: |
| Interface: Graphical user Interface |
| Account Administration: Up to 32 accounts with configurable user privileges |
| Camera Administration: Individually adjust analog camera fps/resolution |
| PTZ Control: Zoom-in/Zoom-out, Focus-in/Focus-out, Direction, Speed, Preset point, Autopan |
| De-interlace options: Optimize for dynamic/static analog camera scenes |
| Playback Administration: Playback while recording or setup / Play, rewind, fast-forward, frame-by-frame control / Digitally zoom to specific regions in recorded video / Export single frame to .jpg, export video clip to .DVR |
| Motion Detection: Configurable to sense mass/motion; can partition off areas in monitoring regions from motion triggers (Analog Cameras only) |
| Event Recording: Continuous/Smart/Motion/Alarm/Manual |
| Alarm Notifications: Launch or send E-map, relay, video capture, CM3000 or E-mail notification |
| Video Event Search: Date/time, camera, event & log files |
| Advanced Event Log: Full event, operation, system & network activities log |
| E-map Display: Positions of cameras, sensors, relays & event status |
| iStable: One-click fix for shaky video caused by camera movement (such as wind or vandalism) |
| iEnhance: Enhance video quality such as Brightness/Contrast/ Hue/ Saturation/ Sharpness/ Noise Reduction/De-interlace/ Gray Scale of recorded video |
| Remote Management: |
| Central Management: CM3000 software (supports up to 1000 DVRs) |
| Remote DVR Connectivity: WebViewer (MS Internet Explorer only), Remote Console, JavaViewer, PDA Viewer |
| Dispatch Server: Balance NVR communication for added client access and greater data transfer speeds |
| DDNS: Allow remote clients to search dynamic servers without enquiring for server's IP address |
| Operating Temperature: 32° to 104°F |
| Storage: -22°F to 140 °F |
| Relative Operating Humidity: 50%-80% / Stored: 90% |
| Dimensions: (H x W x D): 2.1" x 9.2" x 6.3" |
| Weight: 1.25 lbs (not including optional HDD) |
| Emissions: FCC: Part 15, Class A |
|
