Product Finder

EL-ID1 Identifier Series License Bullet Plate Capture Camera

Quick overview:

Introducing the EL-ID1 the most advanced all weather license plate bullet camera available.

Installed at access points, the EL-ID1 captures plates of vehicles entering and exiting properties at speeds of up to 30mph, from a 15-30ft range. Built-in infrared illumination enables plate capture under any lighting condition, while intelligent saturation technology eliminates motion blur and headlight / sunlight glare for a high-contrast image. Delivering perfect plate capture, the EL-ID1 allows the identification of front and rear license plates regardless of the weather or lighting conditions.

The EL-ID1 is also a far more cost efficient solution than other plate cameras without sacrificing quality.

Product specification:

Parameter: 1/3" IDX B/W CCD (License Plate Capture Camera)

Image Sensor: 1/3" IDX B/W CCD

Effective Pixels NTSC: 768(H) x 494(V)

H.Resolution: 600 TV Lines

Synchronizing system: Internal

Scanning system : NTSC 525 lines - 2:1 Interlaced

Video output: 1.0Vp-p Composite. 75 ohms

S/N ratio: Greater than 50dB (AGC off)

Min. Illumination: 0 Lux at F2.0 (IR ON)

Shutter Speed: 1/1000 sec

Gamma correction: Standard r=0.45

Smear Effect: 0.005%

Power Source: DC24V/AC24V

Operating Current: Max. 350mA at 24VDC / Max. 300mA at 24VAC

Lens: 16mm fixed omni-focus lens (multi-focusing)

IR Spectrum: 850nm

Viewable distance: More than 16 feet in zero light

MTBF of IR: 20,000 hours

Operating Temperature: 14?F ~ 122?F (-10?C ~ +50?C)

Humidity: Within 90% RH

IP rating: 67

Measurement (mm) 112(W) x 121(V) x 287(L)

Weight: (Approx. g) 900