| Model |
| IC502w |
| Power |
| DC 5V 2A |
| Processors |
| RISC CPU, hardware video processing and compression. |
| Network interface |
| Ethernet 10BaseT/100BaseTX, Auto-MDIX, RJ-45 |
| Wireless interface |
| IEEE 802.11g 6 - 54 Mbps |
| IEEE 802.11b 1 - 11 Mbps |
| Transmit power: 14.5dBm typically @ 802.11g |
| 17.5dBm typically @ 802.11b |
| Receiver sensitivity: 54Mbps: Typical -73dBm @ 10% PER |
| 11Mbps: Typical -86dBm @ 10% PER |
| Antenna gain: 1.8 dBi |
| Pan/Tilt control |
| Pan range 130° ( -65° ~ 65° ) |
| Tilt range 90° ( 0° ~ 90° ) |
| Auto pan mode |
| Auto patrol mode |
| Image sensor |
| RGB VGA 1/4 inch CMOS |
| Automatic exposure control, automatic white balance, automatic gain control, automatic brightness control. |
| Light sensitivity |
| 0.2 Lux |
| Lens |
| 3.2 mm, F2.0, viewing angle: 60.3°, fixed iris. |
| Focus range: 30 cm to infinity |
| D/I D/O interface |
| 1 D/I for alarm detection |
| 1 D/O for alarm triggering |
| Micro-SD card interface |
| Micro-SD card interface for local video storage |
| The supported Micro SD-Card capacity is up to 32G bytes. |
| Buttons |
| One reset button, to factory default settings |
| Indicators |
| One LED for internet connection status indication |
| One LED for Ethernet connection indication |
| Enable/disable – web configurable |
| Video compression |
| MPEG-4 Part 2 (ISO/IEC 14496-2) with motion detection, profiles: Simple Profile, level 0-3 |
| Frame rate |
| Up to 30 fps in all resolutions |
| Video streaming |
| MPEG-4 |
| Separate frame rate/resolution/bandwidth settings for PC and mobile. |
| Video settings |
| Resolution: VGA(640x480), QVGA(320x240), QQVGA(160x120) |
| Bandwidth: 64k, 128k, 256k, 512k, 768k, 1M, 1.2M, 1.5M bps |
| Frame rate : 5, 10, 15, 20, 25, 30 fps |
| Audio |
| Built-in microphone for audio monitoring |
| Audio compression: MPEG2 audio, AMR-NB for 3GPP/ISMA(RTSP streaming) |
| Security |
| Web management username/password protection |
| Video display ID/password protection |
|
| Installation, management and maintenance |
| Installation tool on CD and Web-based configuration Automatic configuration backup and restore |
| Video management software-CamView for video access and multi-camera management Firmware upgrades via FTP |
| Minimum Web browsing and management software requirements |
| Built-in web server for standard web browser access Pentium 4(or equivalent AMD) CPU 1.0 GHz or higher, 1 GB RAM |
| Supported protocols |
| IPv4, HTTP, TCP, ICMP, RTSP, RTP, UDP, RTCP, SMTP, SNTP, FTP, DHCP, ARP, DNS, PPPoE, etc. |
| Accessories (included) |
| Power adaptor, camera bracket, RJ45 ethernet cable, quick installation guide, CD with installation tool/software and User’s Manual, ID/Password card, antenna. |
| Video management software |
| Surveillance application for viewing and archiving up to 16 cameras |
| Users |
| Up to 20 simultaneous unicast users |
| (depends on video settings) |
| Alarm and event management: Events triggered by video motion detection |
| Notification/upload of JPEG images over FTP and/or email |
| Dimensions: (HxWxD) and weight |
| 120 x 91 x 84 mm, |
| 350 g, camera body only. |
| Approvals |
| EMC - CE, FCC Part 15 Subpart B Class B |
| Wireless RF - CE, FCC Part 15 Subpart C |
| Power supply: CE, FCC, UL, EN 60950 |
| Operating conditions |
| 0-50 °C |
| Humidity 20 - 80% RH (non-condensing) |